Nielsen Sonic 45 Compact

Our original suppressor – a true all-round model

This suppressor has a shorter rear end, then our standard Sonic 45. Since a Sonic 45 compact only covers 7 cm of the barrel, it can be used on rifles where there is a relatively short free barrel, such as. on semi-automatic or heavily shortened rifles. The suppressor has a volume that can be used by a wide range of calibers. On smaller calibers, our other, smaller suppressor can do the job, but in principle, this suppressor can cover almost any caliber from .243 to .375

Our Nielsen Sonic 45 suppressor has a good and solid construction, which allows it to be used even on calibers where the amount of gunpowder exceeds what can be in the suppressor. In addition, there are notches for a C-spanners wrench on the suppressor, so that it is easy to disassemble even after several hundred shots. Now the surface is knurled.

The steel cores

The inside of the suppressor is steel, encapsulated in aluminum. This gives us the strength and durability against wear and tear, while the weight can be kept down. This is why we dare to give a 5 year total warranty for all suppressors purchased directly from us.

Caliber recommendation

When choosing a suppressor, it is important that you pick a suppressor that fits the caliber you use. On the graphic you can see which calibers this suppressor fits, and how well is handles gunpowder volume. Of course, the graphics is just a general guide.

The Sonic 45 suppressor is a true all-round suppressor. Its volume and wall thickness make it suitable for a wide range of calibers.

Technical data

Dimensions

Weight: approx. 360 gram*
Diameter: 45 mm
Length: 195 mm
Extension of barrel: 125 mm
Max barrel thickness: 23 mm
*Weight may vary slightly depending on thread type.

Warranty

Warranty is according to local rules and is assumed by the dealer or distributor from whom it has been purchased. For any products purchased directly from us, we offer a 2-year warranty as described in our Terms & Conditions.In Denmark we offer a full 5-year warranty, provided customers come to our manufacturing address with both rifle, ammunition and suppressor.

Maintenance

- - Avoid shooting the barrel too hot. Give the suppressor a light spray of WD40 or equivalent in the back end prior to mounting and after dismounting the suppressor. Particularly in humid weather.
  - Always allow the suppressor to dry-out thoroughly before placing it in storage.
  - Clean the suppressor as needed. Use only oil and cloth. A trip to the shooting range where the suppressor is shot medium hot is a good way to clear any excess gunpowder residue and soot.
  - Avoid the use of chemically basic cleaning agents, ultrasonic cleaners and brushes or scrubbing creams.
  - If the suppressor is to remain separable, it is recommended to regularly disassemble the suppressor and re-apply grease to the threads of the individual modules. Otherwise, modules will start to lock together over time. For our Sonic suppressors, this is not so much a problem due to the use of C-spanners. For all other suppressor, we offer a set of strap wrenches to aid in disassembly.