Nielsen Paradox 45

Designed for medium calibers. This damper is best suited for calibers such as: .243, 6.5 mm, .270, 30.06 and .308

Read more about weight, dimensions, maintenance and other recommendations in the tabs under the product – or in the banner at the top under “Instructions.”

Opgiv venligst pibe diameteren ved mundingen

Opgiv venligst pibe diameteren 10 cm fra mundingen

This silencer has a volume that fits standard calibers and smaller magnum calibers.

All-Round
This damper has a volume that can be used by a wide range of calibers. It is targeted at standard calibers and smaller magnum calibers.

The Paradox 45 is our further development of the classic Sonic 45. By dropping the notches for chin wrenches, we have been able to reduce the weight by about 100 grams, compared to a Sonic 45. Well noticeable without appreciable effect on the degree of attenuation. At the same time, the surface is glass-blown for less glare and the edges are rounded.

The steel cores
As is known from the Sonic series, Paradox dampers are also equipped with a steel core. The damper is therefore as solid and durable as possible. This core ensures that the damper can withstand the high temperatures that occur when firing many shots within a short period of time.

Caliber recommendation

When choosing your muffler, it is important that you choose a muffler that fits the caliber you are using. On the graphic you can see which calibers can be shot through the muffler, as well as how well the amount of gunpowder can be handled by the muffler.

Nielsen Paradox 45 is a light all-round muffler. The relatively thin wall thickness means that we do not recommend using this muffler on quite powerful calibers such as. and Sonic 45

Technical data

Dimensions

Weight: approx. 375 grams
Diameter: 45 mm
Length: 225 mm
Elongation of pipe: 125 mm
Maximum pipe thickness: 23 mm

Guarantee

In Denmark, all Nielsen Sonic silencers are covered by a 5-year total warranty, provided they are purchased directly from us, and the customer shows up at our production with both the silencer and the rifle it is mounted on.

Maintenance

Never shoot the pipe too hot. Feel free to give the muffler a puff WD40 or similar at the rear end before mounting and after disassembly. Especially if the muffler is used in humid weather.
Always allow the muffler to dry before placing it in storage.
Clean the muffler as needed, using only oil and a cloth. A ride on the shooting range where the muffler is shot moderately hot will also clean it of excess soot.
Avoid using alkaline cleaners, ultrasonic cleaners or brush and scrub cream.
If it is to remain possible to separate the muffler, it is recommended that you regularly separate all modules and apply a little new thread lubrication.

Vigtigt!

Ved køb af nogle af vores produkter skal der forevises våbentilladelse samt billede ID på tilladelseshaveren.. Du kan uploade et billede af tilladelsen & billede ID i kassen.