Ghost 50

This is a lightweight hunting suppressor. With a volume capacity big enough to make a recommended noise reduction on all calibers. Included with the suppressor is four changeable inserts, that makes this suppressor able to be used with multiple calibers.


Multiple Calibers

Four different colored inserts come with each Ghost suppressor. Each insert has a different diameter to match different calibers.
By turning the lid off the suppressor you can easily change the insert and thus use the suppressor on multiple calibers and/or rifles.

  • Max 6mm
  • Max 7mm
  • Max 8mm
  • Max 9,5mm

Low weight

In order to keep the weight as low as possible, we have made this suppressor of high strength aluminium. Which means that it, in spite of its large volume has maintained a low weight.

Because the caliber inserts are made from pure aluminum, it is important to let the silencer cool off after about 10 - 20 shots. Depending on the specific caliber the silencer is used on.


Caliber recommendation

It is important to match suppressor volume with rifle cartridge.

You should therefore select a suppressor suitable for the largest cartridge to be used with the multiple-caliber Ghost models.

Changing insert

Changing insert in order to use your Ghost suppressor with a different caliber is easy. The current insert is held in place as the lid is threaded and tightened onto the suppressor front. So the color indexed inserts can be replaced once the lid is removed. With the new insert in place, simply tighten the lid on the suppressor again and the Ghost suppressor is reconfigured for use with a different caliber..

Technical data


Weight: ca. 385 grams
Diameter: 50 mm
Length: 250 mm
Added length to weapon: 140mm


Warranty according to local legislation. If applicable, this warranty is provided by the local in-country distributor and this distributor provides local service for your device.


Never overheat the gun barrel. If you only fire a single shot, particularly in humid weather, it is always a good idea to spray WD40 into the end of the suppressor.